Is that lab report real?
By Agus Setiawan, Production Supervisor · Reviewed by Budi Santoso, Factory Manager, · published .
Ask AI for an importer brief:
A certificate of analysis is easy to produce and hard to check, which is why it is the document most often faked in this trade. The checks below take a few minutes each.
The short answer: four routes, none through the seller
Every route below has one property in common — it does not pass through the party who gave you the document. That is the whole idea. A laboratory publishes its own address and telephone number; an accreditation body publishes its own register; a batch code is printed on a carton in your own warehouse. None of those can be edited by whoever emailed you a PDF.
- Read the number and the dates first. A genuine report carries a report number and, usually, three dates — received, tested, issued. Write them down before you talk to anyone.
- Find the laboratory yourself. Use the contacts on the laboratory's own letterhead or in the accreditation register. Not the link in the email, not the QR code on the PDF, not the number in the footer of the document you are checking.
- Look up the accreditation and read its scope. Accreditation is granted for named tests. A laboratory can be genuinely accredited and still not be accredited for the test on your certificate.
- Ask the laboratory to confirm. Report number, issue date, does this exist and does it match. One source in this field describes that step as taking about five minutes (ayahlabs.com, laboratory, 25 January 2026).
- Tie the paper to the goods. Match the batch identifier on the certificate to the code printed on the cartons in front of you. A real report for another batch is not evidence about your shipment.
Checking an Indonesian laboratory on KAN's register
The accreditation body is KAN — Indonesia's national accreditation committee — and its register is public. From kan.or.id, follow Direktori LPK → Terakreditasi → Laboratorium → Laboratorium Penguji, which opens the register's "LP Active" report. Search it for the accreditation number printed on the certificate. Each row gives the accreditation number, the laboratory's name, its address, the scope it is accredited for, and the expiry date of the accreditation — the scope and the expiry being the two fields worth reading rather than glancing at.
Match the row to the laboratory that issued the report. One company can hold more than one accreditation — a branch laboratory carries its own number, its own address and its own scope. The scope that matters is the issuing laboratory's, under the number on the certificate, not a sister branch's.
If the scope summary does not name the product, do not guess in either direction. A register's full scope document can sit behind a login, so the summary line may or may not be the whole of the scope. The question to put to the laboratory, in writing, is which scope entry covers the method printed on the certificate for that product.
We do not publish a laboratory report yet; when we do, it is listed on our certifications page, and every check on this page applies to it.
Forgery patterns, without naming anyone
These are the shapes the problem takes. They are described as patterns because naming a producer on the strength of a pattern is how a page like this becomes the thing it warns about. Each is attributed to the source that documented it.
- Results retyped onto the seller's letterhead. A summary of evidence you have not seen. Ask for the laboratory's own report (heavymetaltested.com, testing service, 23 July 2026).
- The self-contained verification loop. The seller supplies the PDF, the QR code, the verification link and the site that says it is genuine. One source puts it exactly: you have not verified four things, you have trusted one source four times (vanguardlaboratory.com, laboratory, undated).
- A real accreditation number on a document the laboratory never issued. Accreditation asks whether a laboratory is competent; authentication asks whether this report is theirs. A genuine number can be copied (vanguardlaboratory.com).
- A reused certificate from an earlier lot. Genuine document, wrong goods — which is why the batch match matters more than the letterhead (ayahlabs.com, 25 January 2026).
- Results that are too consistent. Real analysis moves a little between batches. Identical figures across lots are a reason to ask what was actually tested (ayahlabs.com).
Two of those three sources work in supplements and peptides rather than charcoal. The reasoning transfers because the document does; the markets do not, and neither do their thresholds.
What a supplier should volunteer
You can tell a good deal from what arrives without being asked for. The list below is a reasonable bar to hold anyone to.
- The certificate as issued, with its own report number and dates — not a specification sheet with the numbers copied across. The difference between those two documents is the subject of a separate page.
- The method beside each value. A certificate can split its rows between a published standard such as ASTM D1762-84 and the laboratory's own internal instruction. A supplier who lets you assume everything is ASTM is telling you something.
- A straight answer about basis. As received or dry — a supplier should say which, rather than leave you to pick the flattering reading. Our factory typical values are stated as received. Two numbers on different bases are not comparable, and the difference is not small.
- The validity window. Each certificate states its own validity. A certificate old enough to have expired is not a scandal; presenting it as current is.
- A batch code that leads somewhere. Ours is printed on every carton, and it opens the batch file — see the audit protocol.
Common questions
- Can I contact the laboratory directly to check a certificate?
- Yes, and you should. Give the report number and the issue date and ask whether that report exists and matches what you were sent. The only rule is where you get the contact details from: use the laboratory’s own letterhead or the accreditation register, never a link, QR code or phone number printed on the document you are checking.
- What does an accreditation number actually prove?
- That the laboratory was assessed as competent for a named scope of tests, on a date, with an expiry. It does not prove that your particular certificate is genuine, and it does not automatically cover every test the laboratory performs — accreditation is granted for named methods, so reading the scope matters more than seeing the number.
- A supplier sent a certificate with no batch or lot number. Is that a problem?
- It is the most common failure and it is fatal to the document’s purpose. A certificate describes the sample it was drawn from. With nothing tying that sample to the goods in your warehouse, a genuine report from a real laboratory still proves nothing about your shipment.
Ask for a sample and its COA
A batch COA accompanies every sample, so you can run every check above on it — WhatsApp +62 821 3924 038 or export@coconutcharcoal.org. If you would rather start from the document itself, how to read a charcoal COA walks the fields in order, and what a certificate of analysis proves sets out what it does and does not cover.